// set up drop downs anywhere in the body of the page. I think the bottom of the page is better.. 
	// but you can experiment with effect on loadtime.
	if (mtDropDown.isSupported()) {

		//==================================================================================================
		// create a set of dropdowns
		//==================================================================================================
		// the first param should always be down, as it is here
		//
		// The second and third param are the top and left offset positions of the menus from their actuators
		// respectively. To make a menu appear a little to the left and bottom of an actuator, you could use
		// something like -5, 5
		//
		// The last parameter can be .topLeft, .bottomLeft, .topRight, or .bottomRight to inidicate the corner
		// of the actuator from which to measure the offset positions above. Here we are saying we want the 
		// menu to appear directly below the bottom left corner of the actuator
		//==================================================================================================
		var ms = new mtDropDownSet(mtDropDown.direction.down, 0, 0, mtDropDown.reference.bottomLeft);

		//==================================================================================================
		// create a dropdown menu
		//==================================================================================================
		// the first parameter should be the HTML element which will act actuator for the menu
		//==================================================================================================
		// Use a '#' to represent no URL
		
		// menu : Home
		//var menu1 = ms.addMenu(document.getElementById("menu1"));
			//==================================================================================================

		//==================================================================================================
		// add a sub-menu
		//==================================================================================================
		// to add a sub menu to an existing menu object, call it's addMenu method and pass it the item from
		// the parent menu which should act as it's actuator. To add a submenu to the fourth item of a menu
		// called "theMenu", you would do theMenu.addMenu(theMenu.items[3])
		//==================================================================================================









// menu : Services
		var menu1 = ms.addMenu(document.getElementById("menu1"));		

	menu1.addItem("- Standard System", "#");
	
      menu1.addItem("- Electronics", "#");		
      menu1.addItem("- Components", "#");
      menu1.addItem("- Pumps", "#");
      menu1.addItem("- Thinfilm Products", "#");
      
      
      
	
      var subMenu1 = menu1.addMenu(menu1.items[0]);	


      
      	subMenu1.addItem("- Vacuum Pumping System Modules"," P1t1_oldA.HTM ");
	subMenu1.addItem("- Vacuum Coating Systems ", "#");
	subMenu1.addItem("- Furnaces & Ovens  ", "#");
	
	subMenu1.addItem("- Special Purpose Machines ", "#");
	subMenu1.addItem("- Gas Charging Units ", "P1_e.htm");



//coating system

       var subMenu11 = subMenu1.addMenu(subMenu1.items[1]);	
           
	subMenu11.addItem("- Vacuum Coaters  ", "p1_b.htm");
	subMenu11.addItem("- Laser Ablation Unit  ", "p1_b4.htm");
	
	subMenu11.addItem("- Box Coaters ", "p1_b5.htm");
	subMenu11.addItem("- Sputtering Systems RF/DC ", "p1_b5.htm");

var subMenu111 = subMenu11.addMenu(subMenu11.items[0]);	
           
	subMenu111.addItem("- 12A4 - D    ", "p1_b.htm");
	subMenu111.addItem("- 15F6   ", "p1_bb.htm");
	
	subMenu111.addItem("- 20F10-D    ", "p1_b2.htm");
	subMenu111.addItem("- 24F10-D  ", "p1_b3.htm")

//Ovens

       var subMenu12 = subMenu1.addMenu(subMenu1.items[2]);	
           
	subMenu12.addItem("- Vacuum Ovens  ", "p1_c.htm");
	subMenu12.addItem("- Vertical Furnaces  ", "p1_c1.htm");
	
	subMenu12.addItem("- Horizonatal Furnaces ", "p1_c2.htm");
	subMenu12.addItem("- Hot Press  ", "p1_c3.htm");

//Special puropose systems

       var subMenu13 = subMenu1.addMenu(subMenu1.items[3]);	
           
	subMenu13.addItem("- Photovoltaic Cell Module Laminator  ", "p1_d.htm");
	subMenu13.addItem("- Vacuum Impregnation System   ", "p1_d1.htm");
	
	

//electronocs
	var subMenu2 = menu1.addMenu(menu1.items[1]);
		

	
subMenu2.addItem("- Measuring Instruments  ", "#");
subMenu2.addItem("- Helium Mas Spectrometer Leak Detector", "p2_g.htm");
subMenu2.addItem("- Electron Beam Gun with Power Supplies", "p2_H.htm");
subMenu2.addItem("- Equipments for Lamp Industry", "#");
		

	var subMenu21 = subMenu2.addMenu(subMenu2.items[0]);
		

	
subMenu21.addItem("- Pirani Gauges   ", "P2_a.htm");
subMenu21.addItem("- Penning Gauges ", "p2_b.htm");
subMenu21.addItem("- Microprocessor Based Vacuum Gauge", "p2_c.htm");
subMenu21.addItem("- Bayard Alpert Gauge ", "p2_d.htm");
subMenu21.addItem("- Auto Pumping Controller APC - 2   ", "p_e.htm");
subMenu21.addItem("- Digital Thickness Monitor ", "p2_f.htm");








var subMenu23 = subMenu2.addMenu(subMenu2.items[2]);
		

	
subMenu23.addItem("- 3KW   ", "P2_h.htm");
subMenu23.addItem("- 8KW ", "p2_h1.htm");
subMenu23.addItem("- 10KW", "p2_h2.htm");






var subMenu221 = subMenu21.addMenu(subMenu21.items[0]);
		

	
subMenu221.addItem("- Pirani Gauge - Analog     ", "P2_a.htm");
subMenu221.addItem("- Pirani Gauge - Digital  ", "p2_a1.htm");
subMenu221.addItem("- High Pressure Pirani Gauge - Analog    ", "P2_a2.htm");
subMenu221.addItem("- High Pressure Pirani Gauge - Digital  ", "p2_a3.htm");


var subMenu222 = subMenu21.addMenu(subMenu21.items[1]);
		

	
subMenu222.addItem("- Penning Gauge - Analog     ", "P2_b.htm");
subMenu222.addItem("- Penning Gauge - Digital  ", "p2_b1.htm");


var subMenu22 = subMenu2.addMenu(subMenu2.items[3]);
		

	
subMenu22.addItem("- Internal Lamp Shell Aluminising Systems    ", "P2_i.htm");
subMenu22.addItem("- Automatic Vacuum Pumping Systems  ", "p2_i1.htm");



          //components
	var subMenu3 = menu1.addMenu(menu1.items[2]);
		

	subMenu3.addItem("- Chevron Baffle", "p3_a.htm");
subMenu3.addItem("- Baffle valve", "p3_b.htm ");
subMenu3.addItem("- Solenoid cum Air Admittance Valves  ", "p3_c.htm");		
subMenu3.addItem("- Precision Needle Valve   ", "p3_d.htm");


subMenu3.addItem("- Ultra High Vacuum Needle Valve ", "p3_e.htm");
subMenu3.addItem("- Air Admittance Valve (Manual) ", "p3_f.htm ");
subMenu3.addItem("- Right Angle Valve  ", "p3_h.htm");		
subMenu3.addItem("- Gate Valve   ", "p3_i.htm");

subMenu3.addItem("- Butterfly Valve ", "p3_j.htm");
subMenu3.addItem("- Vacuum Union ", "p3_k.htm ");
subMenu3.addItem("- KF Coupling   ", "p3_l.htm");		
subMenu3.addItem("- Foreline Trap    ", "p3_m.htm");

subMenu3.addItem("- Liquid Nitrogen Trap ", "p3_n.htm");









//pumps
var subMenu4 = menu1.addMenu(menu1.items[3]);

subMenu4.addItem("- Direct Drive Rotary Vane Pumps", "p4_a.htm");
subMenu4.addItem("- Belt Drive Rotary Vacuum Pumps", "p4_b.htm ");
subMenu4.addItem("- Piston Pumps  ", "p4_c.htm");		
subMenu4.addItem("- Roots Pumps  ", "p4_d.htm");
subMenu4.addItem("- Combination Pumps", "p4_e.htm");
subMenu4.addItem("- FD - Series Pumps", "p4_f.htm ");
subMenu4.addItem("- Large Capacity Diffusion Pumps  ", "p4_g.htm");		
subMenu4.addItem("- Diffstack Pumps  ", "p4_h.htm");



//thinfilm

var subMenu5 = menu1.addMenu(menu1.items[4]);

subMenu5.addItem("- Scientific Coatings", "p5_e.htm")

subMenu5.addItem("- Horology", "p5_a.htm");
subMenu5.addItem("- Reprography", "p5_b.htm ");
//subMenu5.addItem("- Ophthalmology", "p5_c.htm");		
subMenu5.addItem("- Bio-Medical", "p5_d.htm");

var subMenu5a = subMenu5.addMenu(subMenu5.items[1]);

subMenu5a.addItem("- Plain Mineral Glass", "p5_a1.htm");
subMenu5a.addItem("- Metalised Mineral Glass", "p5_a2.htm ");
subMenu5a.addItem("- Chemical Etching On Watch Metal Components", "p5_a3.htm");		


var subMenu5b = subMenu5.addMenu(subMenu5.items[0]);

subMenu5b.addItem("- Anti-Reflection Coating(visible)", "p5_e1.htm");
subMenu5b.addItem("- Reflective Coating(Metallic)", "p5_e2.htm ");
subMenu5b.addItem("- Reflective Coating(Dilelectric)",  "p5_e3.htm");		
subMenu5b.addItem("- Beam splitter(metallic & Dielectric)", "p5_e4.htm");
subMenu5b.addItem("- Neutral Density Filters ", "p5_e5.htm ");
subMenu5b.addItem("- Broad-Band & Narrow-Band Filters", "p5_e6.htm");
subMenu5b.addItem("- Long Wave Pass & Short Wave Pass Filters", "p5_e7.htm ");
subMenu5b.addItem("- Dichroic Coating", "p5_e8.htm");
subMenu5b.addItem("- Cold Mirror & Hot Mirror Coatings", "p5_e9.htm ");










// menu : Solutions
		var menu2 = ms.addMenu(document.getElementById("menu2"));		
//	menu2.addItem("- New Products Release-1", "NewProdRelease1.htm");	
//	menu2.addItem("- New Products Release-2", "NewProdRelease2.htm");
	

	




// menu : Company
		var menu3 = ms.addMenu(document.getElementById("menu3"));
		//menu3.addItem("- Literature", "Literature.htm");
		menu3.addItem("- Catalogue", "pdflinks.htm");
		menu3.addItem("- Technical Query", "enq1.htm");
		
           




// menu : Contact
		var menu4 = ms.addMenu(document.getElementById("menu4"));
		//menu4.addItem("- Job Opportunities", "Jobs.aspx");
		//menu4.addItem("- Apply Online", "applyonline.asp?jsub='genral'");
                




// menu : Contact
		var menu5 = ms.addMenu(document.getElementById("menu5"));
		//menu5.addItem("- Site Map", "smsu.html");
		


// menu : Contact
                var menu6 = ms.addMenu(document.getElementById("menu6"));
		//menu6.addItem("- Contact Us", "contact.htm");
		




		
// menu : Contact
		var menu8 = ms.addMenu(document.getElementById("menu8"));
		menu8.addItem("- Milestones", "Milestones.htm");
		menu8.addItem("- Mission Statements", "MISSIONNew.HTM");
        menu8.addItem("- Quality Policy", "QUALITYNew.HTM");
		menu8.addItem("- Vision", "Vision.HTM");
		menu8.addItem("- Statement of values", "StatOfValues.HTM");
		
//==================================================================================================
		// write drop downs into page
		//==================================================================================================
		// this method writes all the HTML for the menus into the page with document.write(). It must be
		// called within the body of the HTML page.
		//==================================================================================================
		mtDropDown.renderAll();
	}